Show me

Can using seat belts wrongly cause injury?

03/12/2017 by Mark Schneider in Safety

Modern cars come packed with an impressive array of safety devices designed to prevent accidents in the first place and to protect the driver and passengers should one still happen.

But one of the most vital pieces of safety equipment is actually one of the oldest. It's the seat belt. The three-point seat belt was invented by Swedish engineer Nils Bohlin in 1958 and became standard equipment in Volvos the following year.

Seat belts have undergone quite a bit of change since then with inertia reels, pretensioners and webclamps now incorporated into the design. They're now easier to use and more effective while giving the user some freedom of movement.

They have five functions:

  • To ensure the wearer decelerates at the same rate as the vehicle in a crash.
  • To spread the force of an impact over the pelvis and chest area, rather than more vulnerable body parts.
  • Preventing the driver or passengers hitting the vehicle's interior.
  • Stopping the occupants being thrown from the vehicle.
  • To work together with airbags so that the occupant's speed is reduced so they hit the airbag safely.

The key to seat belts working with airbags to minimise harm is the seat belt pre-tensioner. It works to tighten the seat belt around the occupant the moment a collision occurs, or by monitoring the brakes when they're applied hard. An Electronic Control Unit (ECU) creates an explosive charge in a gas generator which generates a volume of gas which acts on a mechanical linkage to pull and tighten the seat belt.

The system is similar to the operation of an airbag. Pretensioners are designed to slacken off at the same time the airbag deploys, around 30 milliseconds after the collision.

Seat belts save lives when they're used properly, but use them wrongly and they can actually harm you. Internal injuries to the spine, abdomen, shoulder, neck and sternum are all possible with badly worn seat belts, frequently as a result of that rapid firing pretensioner.

Find out more

Preventing injury from seat belts is as easy as using them correctly.

  • It's vital to position the shoulder belt across your mid chest and away from your neck. It should never be behind your back or under your arm.
  • The lap belt should go firmly across your hips and below your stomach.
  • The belt should never be too tight or too loose so that you move freely and unsecured over the seat.

It's particularly important that your children are securely restrained in the car. Booster seats are vital, reducing the risk of injury by 45%. They're designed to make shoulder belts do their job by positioning them on the right parts of your child's body. Just make sure they comply with Australian standards.

  • From birth to six months babies should be restrained in a rearward facing child restraint like an infant capsule in the back seat.
  • From six months to four years they should be restrained in either a rearward or forward facing child restraint with an in-built harness in the back seat.
  • From four to seven years they should be restrained in either a forward facing child restraint or booster seat restrained by a correctly adjusted and fastened seat belt or child safety harness, again, in the back seat.
  • Children seven years and over can be restrained in an adult seat belt or booster seats.
  • The suggested minimum height for a child to use an adult lap sash seat belt is 145cm.

Wearing seat belts properly is the key to minimising seat belt injuries, and to saving the lives of you and your family in a crash.

Written by
Mark Schneider

Mark is a successful copywriter with over 20 years of professional writing experience.

We welcome him as a guest blogger to Fleettorque.

Related articles

Get in touch with our friendly team